Bruksanvisning Flymo SimpliGlide 330 Gressklipper

Bruksanvisning

EN Electric Hover Lawnmower

1. SAFETY ...............................................4

2. ASSEMBLY ............................................5

3. OPERATION ............................................5

4. MAINTENANCE .........................................6

5. STORAGE .............................................6

6. TROUBLESHOOTING ....................................6

7. TECHNICAL DATA .......................................7

8. ACCESSORIES .........................................7

9. SERVICE / WARRANTY .................................... 7

Original instructions.

This product may be used under super-

vision, or if instruction regarding the safe

use of the product has been provided and the

resulting dangers have been understood, by chil-

dren aged 8 and above, as well as by persons

with physical, sensory or mental disabilities or

alack of experience and knowledge. Children

must not be allowed to play with the product.

Cleaning and user maintenance must not be

performed by children without supervision.

The use of this product by young people under

the age of 16 is not recommended.

Intended use:

The FLYMO Lawnmower is intended to mow lawn in private domestic

gardens and allotments.

The product is not intended for long term use.

DANGER! Risk of injury!

v Do not use the product to cut bushes, hedges, shrubs, to cut

of climbers or grass on roofs or balcony boxes, to chop up

branches, twigs and to level irregularities in the soil. Do not

use the product on a slope steeper than 20° maximum.

IMPORTANT!

Read the operator’s manual carefully before use and keep for future

reference.

Symbols on the product:

Read operator’s manual.

Keep bystanders away.

Beware of sharp blades. Blades continue to rotate

after the motor is switched off. Remove plug from

mains before maintenance or if cord is damaged.

Keep the mains cable away from the cutting blades.

General safety warnings

Electrical safety

DANGER! Electric shock!

Risk of injury due to electric shock.

v The product must be supplied through a residual current device (RCD)

having a rated residual operating current not exceeding 30 mA.

WARNING! Risk of physical injury!

Cut injury when the blade turns or the product starts accidentally.

v Disconnect the product from the mains before you do maintenance or

you replace parts. Thereby the disconnected socket must be in the

visual range.

1. SAFETY

Cables

If extension cables are used, these must comply with the minimum cross-

sections in the table below:

Voltage Cable length Cross section

220 – 240 V / 50 Hz Up to 40 m 1.0 mm²

220 – 240 V / 50 Hz Up to 60 m 1.5 mm²

220 – 240 V / 50 Hz Up to 100 m 2.5 mm²

Minimum rating: 1.0 mm² size cable, 10 amps 250 volts AC.

Your product is supplied with cable wired directly into the product.

1. If the supply cord is damaged, it must be replaced by your local Husqvarna

UK Ltd. Approved Service Centre or similarly qualified persons in order to

avoid a hazard.

2. Do not wire an extension cable directly to your product yourself. Please con-

tact your local Husqvarna UK Ltd. Approved Service Centre for further infor-

mation on the connectors and kits available.

3. Only use extension cables specifically designed for outdoor use and which

conform to one of the following specifications: Ordinary rubber (60245 IEC 53),

Ordinary PVC (60227 IEC 53) or Ordinary PCP (60245 IEC 57).

Training

a) Read the instructions carefully. Be familiar with the controls and the correct

use of the machine.

b) Never allow children or people unfamiliar with these instructions to use the

machine. Local regulations can restrict the age of the operator.

c) Never operate the machine while people, especially children, or pets are

nearby.

d) Keep in mind that the operator or user is responsible for accidents or hazards

occurring to other people or their property.

Preparation

a) While operating the machine always wear substantial footwear and long trou-

sers. Do not operate the machine when barefoot or wearing open sandals.

Avoid wearing clothing that is loose fitting or that hanging cords or ties.

b) Thoroughly inspect the area where the machine is to be used and remove all

objects which can be thrown by the machine.

c) Before using, always visually inspect to see that the blade, blade bolt and the

blade assembly are not worn or damaged. Replace worn or damaged com-

ponents in set to preserve balance. Replace damaged or unreadable labels.

d) Before use check the supply and extension cord for signs of damage or

aging. If the cord becomes damaged during use, disconnect the cord from

the supply immediately.

DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.

Do not use the machine if the cord is damaged or worn.

Operation

a) Operate the machine only in daylight or in good artificial light.

b) Avoid operating the machine in wet grass.

c) Always be sure of your footing on slopes.

d) Walk, never run.

e) Mow across the face of slopes, never up and down.

f) Exercise extreme caution when changing direction on slopes.

g) Do not mow excessively steep slopes.

h) Use extreme caution when reversing or pulling the machine towards you.

i) Stop the blade(s) if the machine has to be tilted for transportation when cross-

ing surfaces other than grass, and when transporting the machine to and from

area to be used.

j) Never operate the machine with defective guards or shields, or without safety

devices, for example deflectors and / or grass collector, in place.

k) Switch on the motor carefully according to instructions and with feet well

away from the blade(s).

l) Do not tilt the machine when switching on the motor, except if the machine

has to be tilted for starting. In this case, do not tilt it more than absolutely

necessary and lift only the part, which is away from the operator.

m) Do not start the machine when standing in front of the discharge opening.

n) Do not put hands or feet near or under rotating parts. Keep clear of the

discharge opening at all times.

o) Do not transport the machine while the power source is running.

p

1

) Stop the machine, and remove plug from the socket. Make sure that all

moving parts have come to a complete stop.

– whenever you leave the machine,

– before clearing blockages or unclogging chute,

– before checking, cleaning or working on the machine,

– after striking a foreign object. Inspect the machine for damage and make

repairs before restarting and operating the machine;

if the machine starts to vibrate abnormally (check immediately)

– inspect for damage,

– replace or repair any damaged parts,

– check for and tighten any loose parts.

4

Page 2 width 2 mm less: 208 mm

EN

SG300EU-20.960.01.indd 4 24.10.20 07:07

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Flymo SimpliGlide 330 Gressklipper. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Flymo. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Flymo SimpliGlide 330 Gressklipper på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Flymo Gressklippere
Flere håndbøker for Gressklippere

Ofte stilte spørsmål om Flymo SimpliGlide 330 Gressklipper

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Flymo Easi Glide 300 Gressklipper

Bruksanvisning

Flymo Turbo Lite 330 Gressklipper

Bruksanvisning

Flymo SimpliGlide 300 Gressklipper

Bruksanvisning

Flymo EM032+ Easimo Gressklipper

Bruksanvisning

Flymo RM032 Rollermo Gressklipper

Bruksanvisning

Flymo Turbo Lite 350 Gressklipper

Bruksanvisning

Flymo Chevron 32 Gressklipper

Bruksanvisning

Flymo XL500 Gressklipper

Relaterte kategorier