Bruksanvisning Master Lock X075ML Safe

Bruksanvisning

2

Bolt-Down Instructions

To help provide maximum security, it is highly recommended

that you bolt down your safe.

1

Set the safe in the place you intend to bolt it down and open the

door.

2

Using a pencil mark the floor through the holes provided in the

bottom or back of your safe.

3

Move the safe away and drill holes of the appropriate diameter

and depth for the type of hardware being used and the mounting

surface.

4

Place the safe back over the holes and install the fasteners as

required.

Note: It is not recommended to attempt to bolt your safe to

both the floor and wall. If bolting to a wall, please ensure the

safe is resting on a supporting surface such as a table or shelf.

Thank you for choosing Master Lock to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Security Safe

For Key Lock Safes

Your Master Lock product is equipped with a high security key lock.

Two (2) keys are provided.

For Digital Combination Safes

Opening Your Safe for the First Time (Using the Override Key)

1

Remove the cover located between the knob

and keypad.

2

Insert the override key provided and turn

counterclockwise.

3

Turn the knob clockwise to open the door.

4

Turn key back clockwise to remove the key and replace the cover

on the door.

Note: In an emergency, situation the safe can be opened using your

override key. DO NOT store your override key inside the safe.

Installing the Batteries

1

With the door open, remove the battery compartment cover located

on the inside of the door by sliding the cover in the direction of the

arrow.

2

Install four (4) AA size alkaline batteries.

Note: Follow the polarity (+/-) markings in the battery

compartment to ensure proper installation.

3

Slide the battery cover back into place.

Note: Do not use rechargeable batteries or

any other type of non-alkaline battery. Do

not mix old and new batteries. Do not mix

alkaline and other battery types.

Using Your Security Safe

IMPORTANT: All security safe models initially work using the

factory code 1-7-5-0-0 -#. It is highly recommended and important

to the security of your valuables that you re-program the safe with a

new user code. Once reprogrammed the factory code can no longer be

used to open your safe.

Programming Your New User Code

1

Open the safe’s door and remove the battery compartment cover.

2

Locate the button inside the battery

compartment and press.

The yellow LED light will go on.

3

Enter a new user code (between 2-8

digits) followed by the “#” key. The

yellow LED light will go off to indicate

the new code has been accepted and

stored.

4

Replace the battery compartment cover.

Note: Always test a new code before storing any valuables

inside the safe.

Unlocking Your Safe

1

Enter your factory code or user code followed by #.

2

The green LED light will go and remain on for 5 seconds.

3

Within 5 seconds, turn the knob clockwise and pull open

the door.

Locking Your Safe

1

With the bolts retracted into the door, firmly close the door of

the safe.

2

Turn the knob in the counter-clockwise direction to secure your

safe.

THE PROBLEM: WHY IT IS HAPPENING: THE SOLUTION:

A red LED light goes on when a button is

pressed.

Battery power is low. • Install four (4) new AA size alkaline batteries.

• Open with override key.

Digital lock is unresponsive when attempting

to press in code.

Battery power is low. • Install four (4) new AA size alkaline batteries.

• Open with override key.

5 beeps and a yellow LED light after entering

your code.

Invalid code. • Wait one minute and retry your code.

• Open with override key.

Troubleshooting

:

masterlock.eu/safes

ENGLISH

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Master Lock X075ML Safe. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Master Lock. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Master Lock X075ML Safe på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Master Lock Safer
Flere håndbøker for Safer

Ofte stilte spørsmål om Master Lock X075ML Safe

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Master Lock X041ML Safe

Bruksanvisning

Master Lock 5441EURD Safe

Bruksanvisning

Master Lock X055ML Safe

Bruksanvisning

Master Lock X125ML Safe

Bruksanvisning

Master Lock X031ML Safe

Bruksanvisning

Rottner Toscana 40 Safe

Bruksanvisning

Yale YSV/250/DB1 Safe

Bruksanvisning

Hard Head 006-027 Safe

Relaterte kategorier