Bruksanvisning Valera SwissX Logica Rettetang

Bruksanvisning

8

•Do not put the appliance on heat sensitive surfaces

during use.

•After use always switch the unit off and remove the

plug from the power supply socket. Do not pull on the

wire to remove the plug from the power supply socket.

Do not pull the plug out of the power supply socket

when your hands are wet.

•Always allow the unit to cool before putting it away and

never wrap the cord around the unit.

•Check that the cord has not been damaged from time

to time.

•Prevent the cord from coming into contact with the

metal parts while these are still hot.

•Use the unit on dry hair.

•Do not use this unit on wigs that have synthetic hair.

•The elements used to pack the unit (plastic bags,

cardboard box, etc.) must be kept out of reach of

children as they are a potential danger to them.

•This unit must only be used for the purposes for which

it is expressly intended. Any other use is to be

considered improper and therefore dangerous. The

manufacturer accepts no responsibility for damage

caused by improper or erroneous use.

•Do not use hair spray while the unit is running.

•Keep the plates clean and free of dust, hair spray,

styling gel, etc.

•To avoid dangerous overheating, it is advisable to

unwind the entire length of the cord.

OPERATING INSTRUCTIONS

PARTS

1. Appliance

2. Straightening plates

3. ON-OFF switch

4. Temperature adjustment controls

(Type 100.01/IS, 100.01/I,

100.01, 100.04/IS, 100.04/I, 100.07/I, 100.07)

5. Temperature selector (Type 100.02/I, 100.02, 100.05/I,

100.05)

6. Indicator light (Type 100.02/I, 100.02, 100.03/I, 100.03,

100.05/I, 100.05, 100.06/I, 100.06)

7. Display (Type 100.01/IS, 100.01/I, 100.01, 100.04/IS,

100.04/I, 100.07/I, 100.07 only)

8. X’Brush accessory (for models supplied with this

accessory

9. Thermocap accessory (for models supplied with this

accessory)

10. Protective band (for models supplied with this accessory)

11. Heat-resistant carry pouch (for models supplied with this

accessory)

Fig. 8.

Switching the appliance

on and off

Type 100.01/IS, 100.01/I, 100.01, 100.02,

100.02/I, 100.04/IS, 100.04/I, 100.05/I,

100.05, 100.07/I, 100.07

To switch the appliance on, simply plug it in to an

electrical socket, then press and hold the O F switch (fig.

1, ref. 3) for one second. To switch it off, press and hold

the ON-OFF button (fig. 1, ref. 3) for one second again

and remove the plug from the socket.

Type 100.03/I, 100.03, 100.06/I, 100.06

To switch the appliance on, plug it in to an electrical

socket and move the switch (fig. 1, ref. 3) to “I”. To

switch it off, move the switch (fig. 1, ref. 3) to “O” and

remove the plug from the socket.

Let the appliance preheat for about 1 minute before

using.

Temperature settings

Type 100.01/IS, 100.01/I, 100.01, 100.04/IS,

100.04/I, 100.07/I, 100.07

To select the operating temperature, switch on the

appliance and press the “+” or “-” control (fig. 1, ref. 4)

°C °F

until the display (fig. 1, ref. 7) shows the desired

temperature.

Different temperatures may be selected for different hair

types at intervals of 10°C, from a minimum of 120°C to

a maximum of 230°C.

After the selected value has been blinking for a few

seconds, the display (fig. 1, ref. 7) will show the actual

temperature of the straightening plates (fig. 1, ref. 2).

When the temperature of the straightening plates is lower

than 110°, 3 dashes flash on the display.

Wait for the selected temperature to be reached, then

begin styling the hair.

Type 100.02/I, 100.02, 100.05/I, 100.05

Select the desired temperature using the corresponding

wheel (fig. 1, ref. 5): when the LED (fig. 1, ref. 6) stops

blinking, the appliance is ready to use.

AUTOMATIC DEACTIVATION

OF SAFETY

and “HOT” FUNCTION

(Not available for models 100.03/I, 100.03,

100.06/I, 100.06)

The appliance automatically switches off 60 minutes

after it was switched on:

- in 100.01/IS, 100.01/I and 100.01, 100.04/IS and

100.04/I, 100.07/I, 100.07 models, 5 minutes before

automatic deactivation, the display (fig. 1, ref. 7) shows

the temperature and the text “off” alternately.

When 60 minutes have elapsed, if the power button (fig.

1, ref. 3) has not been pressed again, the straightening

plates (fig. 1, ref. 2) will begin to cool down; the text

“Hot” appears on the display and remains visible until

the metal plates reach a lower temperature which will not

result in burns on contact with the skin.

- in 100.02/I and 100.02, 100.05/I and 100.05 models,

5 minutes before automatic deactivation, the LED (fig. 1,

ref. 6) blinks very slowly. When 60 minutes have

elapsed, if the power button (fig. 1,

ref. 3) has not been pressed again, the straightening

plates (fig. 1, ref. 2) begin to cool and the LED blinks

very slowly, until they have reached a lower temperature

which will not result in burns on contact with the skin.

MEMORY FUNCTION

In 100.01/IS, 100.01/I, 100.01 100.04/IS and 100.04/I,

100.07/I, 100.07 models, when the appliance is switched

off, the last temperature setting is stored in the memory

and remains active the next time it is switched on.

ION FUNCTION (models 100.01/IS,

100.01/I, 100.04/IS, 100.04/I, 100.07/I only)

This product also has the “ION” function, which is

always active during operation. The appliance produces

a flow of negative ions.

The ion generator may emit a slight humming noise, but

this is perfectly normal.

What are ions?

Ions are electrically charged particles found in nature.

Negatively charged ions help to purify the air by

neutralising the positively charged ions that, by contrast,

reduce its quality by retaining in the atmosphere many

polluting agents.

An abundance of negatively charged ions can be found

after a thunder storm or at the seaside or in the

mountains, close to waterfalls and waterways where the

feeling of well-being is due to the increased presence of

pure, natural, revitalising air.

Improved hydration of hair

Negatively charged ions help to maintain the proper

hydration of your hair.

00060580 int feb2014:Layout 1 27/02/2014 9.12 Pagina 8

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Valera SwissX Logica Rettetang. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Valera. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Valera SwissX Logica Rettetang på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Valera Rettetenger
Flere håndbøker for Rettetenger

Ofte stilte spørsmål om Valera SwissX Logica Rettetang

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Valera SwissX Ideal Rettetang

Bruksanvisning

Valera SwissX Digital Rettetang

Bruksanvisning

Valera Synthesis Rettetang

Bruksanvisning

Valera SwissX Brush and Shine Rettetang

Bruksanvisning

Valera SwissX Digital Ionic Rettetang

Bruksanvisning

BaByliss ST573E Rettetang

Bruksanvisning

Rowenta SF7640E0 Rettetang

Bruksanvisning

OBH Nordica 3119 Björn Axén Tools Essence Curl Rettetang

Relaterte kategorier