Home > Hjem & Innredning > Bevegelsesdetektorer > Steinel Bevegelsesdetektorer > Steinel IS 130-2 Bevegelsesdetektor

Bruksanvisning Steinel IS 130-2 Bevegelsesdetektor

Name: Steinel IS 130-2 Bevegelsesdetektor
Brand: Steinel
SKU: IS 130-2
Rating: 20 (5 reviews)

Trenger du en bruksanvisning for Steinel IS 130-2 Bevegelsesdetektor? Nedenfor kan du se og laste ned PDF-bruksanvisningen gratis på norsk. Dette produktet har for øyeblikket 0 vanlige spørsmål, 2 kommentarer og har 5 stemmer med en gjennomsnittlig produktvurdering på 20/100. Hvis dette ikke er bruksanvisningen du ønsker, vennligst kontakt oss.

Er ditt produkt defekt og finner du ikke løsningen i bruksanvisningen? Dra til en Repair Café for gratis hjelp til reparasjon.

Bruksanvisning

321

110018691 02/2012_C

IS 130-2

Principle

Movement triggers lights, alarms and many other devices - for your convenience and safety. The integrated

pyroelectric infrared detector senses the invisible heat radiated from moving objects (people, animals, etc.).

The heat detected in this way is converted electronically into a signal that activates the load connected. Heat

radiation is not detected through obstacles, such as walls or glass, and will therefore not activate the light.

Safety warnings

■ During installation, the electrical wiring being connected must be dead. Therefore, switch off the power first

and use a voltage tester to check that the power supply is disconnected.

■ Installing this unit involves work on the mains voltage supply. This must therefore be carried out

in accordance with applicable national wiring regulations and electrical operating conditions.

(

- VDE 0100,

-ÖVE-ÖNORM E8001-1,



-SEV 1000)

■ Only use genuine replacement parts.

■ Do not dismantle the unit yourself. It must only be repaired by a specialist workshop.

Installation

 – 

L = live conductor (usually black or brown)



Connection with concealed wiring

N = neutral conductor (usually blue)



Connection with exposed wiring

PE = any protective earth conductor (green/yellow)

Attention: Loop the protective-earth conductor through if necessary. A mains power switch for turning the unit

ON and OFF may of course be installed in the mains supply lead. Important: Reversing the connections may

result in damage to the unit. Please note that the circuit must be protected by a 10 A circuit breaker.

Minimum installation height: 1.70 m.



Fluorescent lamps, low-energy bulbs, LED lights with electronic ballast (total capacity of all connected

ballasts below the value specified) operating on 230 V AC.

Function



Twilight setting (factory setting: daylight operation at 2000 lux):

The sensor's response threshold can be infinitely varied from 2 – 2000 lux.

Control dial set to = daylight operation at approx. 2000 lux.

Control dial set to = night-time operation at approx. 2 lux.

To adjust the detection zone in daylight, the control dial must be set to (daylight operation).

Time setting (factory setting: 8 sec.): Light 'ON' time can be set from 8 secs. to 35 mins.

Control dial set to – = shortest time (8 sec.)

Control dial set to + = longest time (35 min.)

When setting the detection zone, it is recommended to select the shortest time –.

Adjust detection zone at swivel mount



Reach 2 – 12 m, by tilting sensor lens through 90°.



Using adhesive shrouds, e.g. to mask out paths or neighbouring properties.

Important: The most reliable way of detecting motion is to install the SensorLight with the sensor aimed across

the direction in which a person would walk and by ensuring that no obstacles (such as trees and walls, for

example) obstruct the line of sensor vision. Reach is limited when walking directly towards the light.

Troubleshooting (Fault / Cause ➩

Remedy

)

No power / Fuse faulty, not switched on ➩

new fuse, turn power switch ON, check lead with voltage tester.

Will not switch ON / Surroundings still too bright ➩

wait until response threshold is reached or adjust setting

Bulb faulty ➩

change bulb /

Power switch OFF ➩

switch on /

Detection zone not properly targeted ➩

readjust.

Will not switch OFF / Permanent movement in the detection zone ➩

adjust detection zone

. Keeps switching

ON/OFF / There is a light in the detection zone ➩

change detection zone, increase distance

. Switches ON

when unwanted / Detecting cars on the road, for example ➩

change detection zone, tilt sensor down.

Reach changing / Differing ambient temperatures ➩

at low temperatures, shorten reach by tilting sensor

down; at high temperatures, tilt sensor up.

Declaration of conformity

This product complies with Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC and RoHS Directive

2002/95/EC.

Functional warranty

This STEINEL product has been manufactured with great care, tested for proper operation and safety in accordance

with applicable regulations and then subjected to random sample inspection. STEINEL guarantees that it is perfect

condition and proper working order. The warranty period is 36 months, starting from the date of sale to the con-

sumer. We will remedy defects caused by material flaws or manufacturing faults. The warranty will be met by

repair or replacement of defective parts at our own discretion. The warranty does not cover damage to wear parts,

nor does it cover damage or defects caused by improper treatment, maintenance or the use on non-genuine parts.

Further consequential damage to other objects shall be excluded. The warranty will only be honoured if the product

is sent to the appropriate Service Centre fully assembled and well packed with a brief description of the fault,

receipt or invoice (date of purchase and dealer's stamp). Service: Our Customer Service Department will repair

faults not covered by warranty or after the warranty period. Please send the product well packed to your

nearest Service Centre.

ENGLISH

–



Vurdering

La oss få vite hva du syns om Steinel IS 130-2 Bevegelsesdetektor ved å gi en produktbedømmelse. Vil du dele dine erfaringer med dette produktet eller stille et spørsmål? Legg igjen en kommentar nederst på siden.

Er du fornøyd med Steinel IS 130-2 Bevegelsesdetektor?
Ja Nei

20%

80%

5 stemmer

Bli med i samtalen om dette produktet

Her kan du dele hva du synes om Steinel IS 130-2 Bevegelsesdetektor. Hvis du har et spørsmål, les først bruksanvisningen nøye. Be om en bruksanvisning kan gjøres ved å bruke vårt kontaktskjema.

Jean Demorieux 23-01-2021
Jeg har nettopp koblet IS 130-2-sensoren til 220 v-nettverket og til LED-projektoren, og respekterer instruksjonene i monteringsanvisningen og forsikrer meg om at nettverksledningen koblet i posisjon L faktisk var den til fasen (226 v i forhold til jorden) Etter tilkobling til strømnettet slår ikke projektoren seg på !! hvilken diagnose kan utledes (posisjon av potensiometeret på månen) og medianposisjon for varigheten av belysningen

svar | Det var nyttig (8) (Oversatt av Google)

Tacheau 03-09-2021
Hei, jeg har bare tre sønner som kommer ut av veggen min. En svart, en blå og en jordgulgrønn. Sammenlignet med produktet ditt mangler jeg en tråd for å drive det lilla. Kan du fortelle meg mer. hjertelig

svar | Det var nyttig (7) (Oversatt av Google)

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Steinel IS 130-2 Bevegelsesdetektor. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Steinel. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Steinel IS 130-2 Bevegelsesdetektor på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.