Bruksanvisning Skil 3018 HD Drill-skrutrekker

Bruksanvisning

10

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

- the load is too high --> remove load and restart

- the battery temperature is not within the allowable

operating temperature range of -20 to +50°C --> 2

levels of the battery level indicator start ashing when

pressing button N

8

c; wait until battery has returned

within the allowable operating temperature range

- the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level

8

b is shown by the battery level indicator

when pressing button N; charge battery

! 



damaged

• Changing direction of rotation

9

- when not properly set in left/right position, switch A

2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Changing bits

q

! do not use bits with a damaged shank

• Torque control (VariTorque)

w

- output torque will increase as clutch ring B is rotated

from 1 to 17

- when turning in a screw, rst try VariTorque position 1

and increase until the desired depth has been reached

- position F will lock up the clutch to permit (non-impact)

drilling or driving heavy-duty work

- position D will lock up the clutch to permit impact

drilling only

! ensure that gear selector B is in position 2 when

function selector C is in impact drilling position

! do not use impact drilling position D for drilling in

wood, metal, ceramic and plastic to prevent the

drill/screw bit from being damaged

• Mechanical gear selection

e

- set selector G to desired speed

! actuate the gear selector while tool is running

slowly

1

- low speed

- high torque

- for screwdriving and drilling large diameters

- for tapping thread

2

- high speed

- lower torque

- for impact drilling

- for drilling small diameters

• Holding and guiding the tool

t

! while working, always hold the tool at the grey-

coloured grip area(s)

- keep ventilation slots J

2

uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool clean (especially ventilation slots H

2

)

! remove battery from tool before cleaning

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

DURING USE

• In case of electrical or mechanical malfunction,

immediately switch o the tool or unplug charger from

power source

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

- SKIL battery: BR1*31****

- SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

- when charging 4...40°C

- during operation –20...+50°C

- during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3

Read the instruction manual before use

4

Batteries may explode when disposed of in re, so do not

burn battery for any reason

5

Store tool/charger/battery in locations where temperature

will not exceed 50°C

6

Do not dispose of electric tools and batteries together

with household waste material

USE

• Combined switch for on/o and speed control A

2

- control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery

2

• Attaching belt clip

7

- attach the belt clip L to the drill with the supplied screw.

• Battery level indicator

8

- press the battery level indicator button N to show the

current battery level

8

a

! when the lowest level of the battery indicator



8

b, the

battery is empty

! 

after pressing button N

8

c, the battery is not

within the allowable operating temperature range

• LED-light M

r

LED-light M automatically lights on when activating

switch A

! 

protection is activated (see below)

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Skil 3018 HD Drill-skrutrekker. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Skil. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Skil 3018 HD Drill-skrutrekker på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Skil Drill-skrutrekkere
Flere håndbøker for Drill-skrutrekkere

Ofte stilte spørsmål om Skil 3018 HD Drill-skrutrekker

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Skil 3020 HC Drill-skrutrekker

Bruksanvisning

Skil 3008 HB Drill-skrutrekker

Bruksanvisning

Skil 3020 HD Drill-skrutrekker

Bruksanvisning

Skil 3010 DA Drill-skrutrekker

Bruksanvisning

Skil 2844 AC Drill-skrutrekker

Bruksanvisning

Skil 3071 EA Drill-skrutrekker

Bruksanvisning

Skil 3018 HA Drill-skrutrekker

Bruksanvisning

Skil 3008 HE Drill-skrutrekker

Relaterte kategorier