Bruksanvisning Russell Hobbs 17877-56 Easy Fill Strykejern

Bruksanvisning

3

C PREPARATION

5 Check for textile care symbols (i j k l).

6 Iron fabrics needing low temperatures j first, then those that need medium temperatures

k, and finish with those needing high temperatures l.

X FILLING

7 The iron may be used with tap-water, but if you live in a hard-water area, you should use

distilled water (not chemically descaled water).

8 If you buy distilled water, check that it is marketed as suitable for irons.

9 Don’t add anything to the water – you’ll damage the iron.

10 Unplug the appliance.

11 Set the temperature control to •. Set the steam control to S.

12 Hold the iron with the heel uppermost.

13 Press the V button, and keep it pressed in. This opens the valve

14 Pour water into the heel till it stops disappearing into the reservoir, and starts to back up.

15 Release the V button. This closes the valve.

16 Tip excess water out of the heel.

17 Wipe up any spillage.

C SWITCH ON

18 Set the temperature control to •.

19 Sit the iron on its heel.

20 Put the plug into the power socket.

21 Turn the temperature control to bring the setting you want (see the guide below) next to the

5 mark. The light will glow.

22 When the iron reaches the set temperature, the light will go off.

23 It will then cycle on and off as the thermostat operates to maintain the temperature.

temperature setting guide

label marking temperature setting

j cool – nylon, acrylics, polyester •

k warm – wool, polyester mixtures ••

l hot – cotton, linen •••/max

i do not iron

, If the instructions on the fabric label differ from this guide, follow the instructions on the

label.

C REDUCING TEMPERATURE

24 Reducing temperature takes longer, as the appliance has to lose heat.

25 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 6).

h STEAM IRONING

26 If you intend to use steam, the temperature setting must be S or higher.

27 If you don’t, you’ll get water on your clothes, not steam.

28 Set the steam control to the setting you want (S = no steam, S = low, # = high).

29 Wait till the light goes off, then start ironing.

instructions

diagrams

1 temperature control

5 mark

S steam available

2 light

3 steam control

# high steam

S no steam

4 spray nozzle

5 soleplate

6 steam vents

7 reservoir

8 heel

9 water inlet

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Russell Hobbs 17877-56 Easy Fill Strykejern. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Russell Hobbs. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Russell Hobbs 17877-56 Easy Fill Strykejern på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Russell Hobbs Strykejerner
Flere håndbøker for Strykejerner

Ofte stilte spørsmål om Russell Hobbs 17877-56 Easy Fill Strykejern

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Russell Hobbs 22523-56 AutoSteam Ultra Strykejern

Bruksanvisning

Russell Hobbs 21530-56 Extreme Gilde Strykejern

Bruksanvisning

Russell Hobbs 21260-56 SmartFill Strykejern

Bruksanvisning

Russell Hobbs 22520-56 AutoSteam Strykejern

Bruksanvisning

Russell Hobbs 25090 One Temperature Strykejern

Bruksanvisning

Russell Hobbs 20630-56 Power Steam Ultra Strykejern

Bruksanvisning

Russell Hobbs 24800-56 Strykejern

Bruksanvisning

Russell Hobbs 23300 Supreme Steam Strykejern

Relaterte kategorier