Bruksanvisning Philips GC3593 Strykejern

Bruksanvisning

2 Wind the mains cord round the cord storage facility (Fig. 15).

3 Store the iron on its heel in a safe and dry place.

Environment

- Do not throw away the appliance with the normal household waste at the end

of its life, but hand it in at an ofcial collection point for recycling. By doing this,

you help to preserve the environment (Fig. 16).

Guarantee & service

If you need service or information or if you have a problem, please visit the Philips

website at www.philips.com or contact the Philips Consumer Care Centre in your

country (you nd its phone number in the worldwide guarantee leaet). If there is no

Consumer Care Centre in your country, go to your local Philips dealer.

Troubleshooting

This chapter summarises the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron is

plugged in, but

the soleplate

stays cold.

There is a connection

problem.

Check the mains cord, the plug and the

wall socket.

The temperature dial

is set to MIN.

Set the temperature dial to the

required position

The iron does

not produce

any steam.

There is not enough

water in the water

tank.

Fill the water tank (see chapter

‘Preparing for use’, section ‘Filling the

water tank).

The steam control is

set to position 0.

Set the steam control to a position

between 1 and 4 (see chapter ‘Using

the appliance’, section ‘Steam ironing’).

The iron is not hot

enough and/or the

drip-stop function

has been activated

(specic types only).

Set an ironing temperature that is

suitable for steam ironing ( 2 to

MAX). Put the iron on its heel and wait

until the amber temperature light goes

out before you start ironing.

Water

droplets drip

onto the fabric

during ironing.

The temperature

dial has been set to

a temperature that

is too low for steam

ironing.

Set an ironing temperature that is

suitable for steam ironing (temperature

settings 2 to MAX). Put the iron

on its heel and wait until the amber

temperature light goes out.

You have put an

additive in the water

tank.

Rinse the water tank and do not put

any additive in the water tank.

You have not closed

the cap of the lling

opening properly.

Press the cap until you hear a click.

Flakes and

impurities

come out of

the soleplate

during ironing.

Hard water forms

akes inside the

soleplate.

Use the Calc-Clean function one or

more times (see chapter ‘Cleaning

and maintenance’, section ‘Calc-Clean

function’).

The

temperature

light ashes

red (specic

types only).

The automatic shut-off

function has switched

off the iron (see

chapter ‘Features’).

Move the iron slightly to deactivate the

automatic shut-off function. The red

auto-off indication of the temperature

light goes out.

Water drips

from the

soleplate

after the iron

has cooled

down or has

been stored

(specic types

only)

You have put the iron

in horizontal position

while there was still

water in the water

tank.

Always set the steam control to

position 0 and empty the water tank

after use. Store the iron on its heel.

The iron does

not produce a

steam boost.

You used the steam

boost function too

often within a short

period.

Continue ironing in horizontal

position and wait a while before you

use the steam boost function again..

The iron is not hot

enough.

Set an ironing temperature at which

the steam boost function can be used

(temperature settings 2 to MAX).

Put the iron on its heel and wait until

the amber temperature light goes

out before you use the steam boost

function.

Drip stop (specic types only)

This iron is equipped with a drip-stop function: the iron automatically stops producing

steam when the temperature is too low, to prevent water from dripping out of the

soleplate. When this happens you may hear a sound.

Automatic shut-off function (specic types only)

The automatic shut-off function automatically switches off the iron if it has not been

moved for a while.

, Theredauto-offindicationofthetemperaturelightashestoindicatethatthe

iron has been switched off by the automatic shut-off function (Fig. 6).

To let the iron heat up again:

1 Pick up the iron or move it slightly

, The red auto-off indication goes out.

, If the temperature of the soleplate has dropped below the set ironing

temperature, the amber temperature light goes on.

2 If the amber temperature light goes on after you have moved the iron, wait for

it to go out before you start ironing.

Note: If the amber temperature light does not go on after you move the iron, the soleplate

still has the right temperature and the iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the plug from the wall socket and

let the iron cool down.

2 Wipeakesandanyotherdepositsoffthesoleplatewithadampclothanda

non-abrasive (liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal objects. Never use a

scouring pad, vinegar or other chemicals to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty the water tank after you

have rinsed it (Fig. 12).

Double-Active Calc System (specic types only)

The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank

combined with the Calc-Clean function.

1 The Anti-Calc tablet prevents scale from clogging the steam vents. This tablet is

constantly active and does not need to be replaced (Fig. 13).

2 The Calc-Clean function removes the scale particles from the iron.

Calc-Clean function

Use the Calc-Clean function once every two weeks. If the water in your area is very

hard (i.e. when akes come out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

3 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents in the water tank.

4 Set the temperature dial to MAX.

5 Put the mains plug in an earthed wall socket.

6 Unplug the iron when the temperature light goes out.

7 Hold the iron over the sink, press and hold the Calc-Clean button and gently

shake the iron to and fro (Fig. 14).

, Steamandboilingwatercomeoutofthesoleplate.Impuritiesandakes(if

any)areushedout.

8 Release the Calc-Clean button as soon as all the water in the tank has been

used up.

9 Repeat the Calc-Clean process if the iron still contains a lot of impurities.

After the Calc-Clean process

1 Put the plug back into the wall socket and let the iron heat up to let the

soleplate dry.

2 Unplug the iron when the temperature light goes out.

3 Move the iron gently over a piece of used cloth to remove any water stains

that may have formed on the soleplate.

4 Let the iron cool down before you store it.

Storage

1 Set the steam control to position 0, remove the plug from the wall socket and

let the iron cool down.

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Philips GC3593 Strykejern. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Philips. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Philips GC3593 Strykejern på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Philips Strykejerner
Flere håndbøker for Strykejerner

Ofte stilte spørsmål om Philips GC3593 Strykejern

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Philips GC9545 Strykejern

Bruksanvisning

Philips GC9236 Strykejern

Bruksanvisning

Philips GC8460 Strykejern

Bruksanvisning

Philips GC6740 Strykejern

Bruksanvisning

Philips DST7041 Strykejern

Bruksanvisning

Philips GC9415 Strykejern

Bruksanvisning

Philips DST7040 Strykejern

Bruksanvisning

Philips GC9420 Strykejern

Relaterte kategorier