Bruksanvisning Makita 6822 Skrutrekker

Bruksanvisning

3

ENGLISH (Original instructions)

Explanation of general view

1 Locking sleeve

2 Approximately 1 mm

3 Locator

4Low

5 High

6 Speed control screw

7 Switch trigger

8 Lock button

9 Reversing switch lever

10 Bit

11 Magnetic bit holder

SPECIFICATIONS

Model 6822

Capacities

Self drilling screw ................................................. 6 mm

Drywall screw ......................................................5 mm

Bit shank size .....................................................1/4" Hex

No load speed (min

–1

) ...................................... 0 – 4,000

Overall length .................................................... 258 mm

Net weight .............................................................. 1.4 kg

Safety class ............................................................... /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE033-1

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB017-4

SCREWDRIVER SAFETY WARNINGS

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the fas-

tener may contact hidden wiring or its own cord.

Fasteners contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Depth adjustment

The depth can be adjusted by turning the locking sleeve.

Turn it in “A” direction for less depth and in “B” direction

for more depth. One full turn of the locking sleeve equals

1.5 mm change in depth. (Fig. 1)

Adjust the locking sleeve so that the distance between

the tip of the locator and the screw head is approximately

1 mm as shown in Fig. 2 or 3. Drive a trial screw into your

material or a piece of duplicate material. If the depth is

still not suitable for the screw, continue adjusting until you

obtain the proper depth setting. (Fig. 2 & 3)

Switch action (Fig. 4)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

NOTE:

• Even with the switch on and motor running, the bit will

not rotate until you fit the point of the bit in the screw

head and apply forward pressure to engage the clutch.

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Makita 6822 Skrutrekker. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Makita. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Makita 6822 Skrutrekker på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Makita Skrutrekkere
Flere håndbøker for Skrutrekkere

Ofte stilte spørsmål om Makita 6822 Skrutrekker

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Makita BFT122F Skrutrekker

Bruksanvisning

Makita 6793D Skrutrekker

Bruksanvisning

Makita 6798FD Skrutrekker

Bruksanvisning

Makita 6837 Skrutrekker

Bruksanvisning

Makita BFL401F Skrutrekker

Bruksanvisning

Makita 6791D Skrutrekker

Bruksanvisning

Makita 6833 Skrutrekker

Bruksanvisning

Makita BFL400F Skrutrekker

Relaterte kategorier