Bruksanvisning Makita 6805BV Skrutrekker

Bruksanvisning

ENGLISH

Explanation of general view

1 Front cap

2 Locator

3 Pointer

4 Adjusting ring

5 Low

6 High

7 Speed control screw

8 Switch trigger

9 Lock button

0 Reversing switch lever

SPECIFICATIONS

Model 6805BV

Capacities

Self drilling screw .......................................... 6 mm

Machine screw .............................................. 8 mm

Wood screw ............................................... 6.2 mm

Bit shank size ............................................. 1/4’’ Hex

No load speed (RPM) ................................ 0 – 2,500

Overall length ............................................... 267 mm

Net weight ....................................................... 1.9 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Always be sure you have a firm footing.

Be sure no one is below when using the

machine in high locations.

2. Hold the machine firmly.

3. Keep hands away from rotating parts.

4. When driving into walls, floors or wherever

‘‘live’’electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE!

Hold the machine by the insulated grasping

surfaces to prevent electric shock if you drive

into a ‘‘live’’ wire.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Removing or installing the bit (Fig. 1)

Important:

Always be sure that the machine is switched off and

unplugged before removing or installing the bit.

To remove the bit, first pull the front cap off and then

pull the bit firmly. To install the bit, insert it into the

machine as far as it will go and then replace the front

cap.

Depth adjustment (Fig. 2,3&4)

When you wish to drive self drilling screws, etc.,

adjust the depth as follows.

Turn the locator to adjust the depth.

Initially, adjust the locator to create a distance of

approximately 1 mm from the tip of the front cap

(which works in conjunction with the locator) to the

base of the screw head. One full turn of the locator

equals 1 mm change in depth. After adjusting the

locator, turn the adjusting ring so that the 6″ mark is

aligned with the pointer on the gear housing. Drive a

trial screw into your material or a piece of duplicate

material. If the depth is not suitable for the screw,

continue adjusting until the proper depth setting is

obtained.

Adjusting fastening torque (Fig. 5)

When you wish to drive machine screws, wood

screws, hex bolts, etc. with the predetermined torque,

adjust the fastening torque as follows.

The fastening torque may be adjusted by turning the

adjusting ring. Before turning the adjusting ring, turn

the locator in the direction of the arrow as far as it will

go without forcing. The torque is increased by turning

the adjusting ring in the direction of the arrow and

decreased by turning it in the opposite direction. Align

the number 1 on the adjusting ring with the pointer on

the gear housing. Drive a trial screw into your material

or a piece of duplicate material. If the fastening torque

is not suitable for the screw, continue adjusting until

the proper torque is obtained.

CAUTION:

The adjusting ring should be turned only within the

numbered range. It should not be forced beyond this

range.

6805BV(Eng) (’96. 2. 22)

3

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Makita 6805BV Skrutrekker. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Makita. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Makita 6805BV Skrutrekker på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Makita Skrutrekkere
Flere håndbøker for Skrutrekkere

Ofte stilte spørsmål om Makita 6805BV Skrutrekker

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

Makita BFT123F Skrutrekker

Bruksanvisning

Makita BFT021F Skrutrekker

Bruksanvisning

Makita 6791D Skrutrekker

Bruksanvisning

Makita 6798D Skrutrekker

Bruksanvisning

Makita 6833 Skrutrekker

Bruksanvisning

Makita 6807 Skrutrekker

Bruksanvisning

Makita BFT080F Skrutrekker

Bruksanvisning

Makita 6798FD Skrutrekker

Relaterte kategorier