Bruksanvisning FERM BLM1004 Dreiebenk

Bruksanvisning

2 Ferm

Product: Ferm Metal turning lathe.

Type FM-760/300T; art. nr. 331710

Type FM-1000/350T; art.nr. 331730

Ferm, Genemuiden, The Netherlands.

Sound pressure level (L

pa

):< 82 dB(A)

The sound-pressure level in the workplace

may exceed 85 dB(A). In this case, measures

for noise protection and ear protection for

the user are necessary.

READ THE INSTRUCTIONS FOR USE

BEFORE YOU USE THE METAL TURNING

LATHE !

1. USE

This universal turning lathe is suitable for different types

of turning activities and also for drilling out, drilling,

grooving etc. In addition, the machine can also be used for

cutting screw thread (both metric and inches). The ma-

chine takes up little space and also distinguishes itself by

its simple construction, ease of operation and its large

spindle bore.

2. SPECIAL SAFETY REGULATIONS

The turning lathe has been designed to machine hard

material and it must therefore be capable of genera-

ting much power.

It is therefore fatally dangerous to touch moving

parts. For this reason, improper, undesired or unin-

tentional engaging of the machine must therefore be

avoided.

Due to the spring-mounted working of the cutter,

metal particles can be shot off, so to speak, with gre-

at force and at the most unexpected moments.

- Protection of the eyes is therefore extremely impor-

tant. Make it a habit to wear specially available safety

glasses when in the area where the turning lathe is po-

sitioned. Buy yourself a pair of professional and ap-

proved safety glasses which you can wear for longer

periods after each other and for visitors, if necessary,

a slightly cheaper but nevertheless good pair.

- By making sure that the workplace is tidied up, you

can prevent, for example, people grabbing the machi-

ne or falling into it after tripping over material lying

about.

Be extremely careful when working turning work-

pieces by hand.

- If you wish to polish a surface while it is turning, use a

sufficiently long piece of sandpaper which you place

halfway around the workpiece with the ends towards

you.

- Never wrap the ends around your fingers and never

press the sandpaper onto the workpiece using your

hands.

- Due to turning, the edges of the workpiece become

razor-sharp. First smooth off these edges with a file

or a trimming hook.

During turning, never remove chips with your fingers.

Do this by using a self-made hook from wire or buy a

professional chip hook.

During turning, when something falls into or behind

the bed, never reach across the turning machine or

lathe chuck.

Always stop the machine first.

Good lighting prevents you operating the machine

from too close by.

- When using strip lighting, the so-called stroboscopic

effect must be taken into consideration. As a result, a

turning object can appear to be standing still. A solu-

tion is the use of double fittings whereby a phase shift

of both strip lights has been realized.

3. INSTALLATION

1. Remove the paper which covers the unpainted parts

and remove all the grease from these parts using a

non-volatile solvent and a brush.

2. Fit the straps as shown in Illustration 1 and position

the machine in its place.

3. The machine must be firmly fastened to the floor by

means of the supports. If you have a bench centre lat-

he, place the chip collecting vessel on the workbench

and, using a pencil, indicate the spot where the six bolt

holes will be placed for fastening the bed. Then drill

the six holes.

4. In order to be able to work accurately, the bed must

always be level. Follow the method of work described

below:

- Slide the carriage in the direction of the fixed head.

- Place the spirit level at an angle of 90° on top of the

cross slide.

- Loosen the fastening bolts and raise the support (or

the bed) until the air bubble in the spirit level is exactly

UK

English

Ferm 35

Art.

nr.

Type

1'

V~/Hz W RPM mm. mm

331710 FM-760/300T 400 1.125 50-1.500 150 760

331730 FM-1000/350T 400 1.125 50-1.500 175 1000

2 1

3 5 4 7 6

8

9

Fig. 8

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for FERM BLM1004 Dreiebenk. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter FERM. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til FERM BLM1004 Dreiebenk på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for FERM Dreiebenker
Flere håndbøker for Dreiebenker

Relaterte produkter

Bruksanvisning

FERM WLM1002 Dreiebenk

Bruksanvisning

FERM BLM1003 Dreiebenk

Bruksanvisning

FEMI Digito ML 350 Dreiebenk

Relaterte kategorier