Bruksanvisning FERM BGM1003 Båndsliper

Bruksanvisning

EN

6

Wear ear and eye protection

wear a dustmask

Keep bystanders away

The product is in accordance with the

applicable safety standards in the

European directives.

Special safety instructions

• The following points need to be checked:

• Do the connecting voltage of the machine

correspond with the mains voltage.

• Are the mains lead and the mains plug in a

good condition; strong, without ravels or

damages.

• For functional reasons the turning parts of this

machine are not covered. Therefore it is of

utmost importance to be careful. Hold the

workpiece firmly, to prevent it from slipping

from your hands. Never touch the sanding

surfaces of a working machine with your

hands.

• Avoid the use of long extension cables.

Before you operate the machine:

• Always keep the mains cable away from

moving parts of the machine.

• Use safety goggles.

• Use a dust mask.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Mains plug replacement (UK only)

If the moulded 3-pin plug attached to the unit is

damaged and needs replacing, it is important

that it is correctly destroyed and replaced by

an approved BS1363/13A fused plug and that

the following wiring instructions are followed.

The wires in the mains cable are coloured in

accordance with the following code:

• blue  neutral

• brown live

As the colours of the wires in the mains cable

of the unit may not correspond to the coloured

markings identifying the terminals in the plug,

proceed as follows:

• The wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black.

• The wire which is coloured brown must be

connected to the terminal which is marked with

the letter L or coloured red.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

2

. When using a cable

reel always unwind the reel completely.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes and

verticiliosis in the collector.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation

3. Before putting the machine

into operation

Installation

Avoid the use of long extension cables. Do not

forget to leave enough space around the machine

for the workpieces to be sanded.

Assembly

• Put the machine frame on its head and press

the four rubber stops into the foot of the frame.

• Machine frame, aluminium disc (10) and work

plate (12) are supplied in separate packaging.

• Push the aluminium disc on the shaft and

fasten the disc with the socket bolt in the side

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for FERM BGM1003 Båndsliper. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter FERM. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til FERM BGM1003 Båndsliper på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for FERM Båndslipere
Flere håndbøker for Båndslipere

Ofte stilte spørsmål om FERM BGM1003 Båndsliper

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Relaterte produkter

Bruksanvisning

FERM BSM1004 Båndsliper

Bruksanvisning

FERM BGM1022 Båndsliper

Bruksanvisning

FERM EFM1001 Båndsliper

Bruksanvisning

FERM BSM1003 Båndsliper

Bruksanvisning

FERM BSM1021 Båndsliper

Bruksanvisning

FERM BSM1020 Båndsliper

Bruksanvisning

FERM BGM1001 Båndsliper

Bruksanvisning

FERM BSM1024 Båndsliper

Relaterte kategorier