Bruksanvisning Exibel L402-A Laminator

Bruksanvisning

GREAT BRITAIN - CUSTOMER SERVICE contact number: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

English

Ver. 20130806

A4 Laminator

Art.no 18-4534 Model L402-A-UK

34-1401 L402-A

Please read theentire instruction manual before using and save it

for future use. We apologise for any text or photo errors and any

changes of technical data. If you have any questions concerning

technical problems please contact our Customer Service Department.

1. Safety

• Unplug thelead before cleaning.

• The laminator may not be used by children without

thesupervision of anadult.

• Do not insert any metal objects like paperclips, coins, etc.

intothemachine.

• Do not insert anything other than lamination film into themachine.

• Do not disassemble thelaminator or attempt to repair it

yourself. Thelaminator must not be modified in anyway.

• The laminator may produce aburnt odour when first used.

Thisis completely normal.

• Do not touch any of themachine’s hot surfaces. Burninjuries

may result.

• Never use thelaminator in humid environments or near

sources of water, such as sinks, taps, etc.

• The mains lead should be checked regularly. Neveruse

theproduct if themains lead or its plug is damaged or if

theproduct is not functioning properly.

• If themains lead is damaged, it must only be replaced by

aqualified service technician in order to prevent any risk of fire

or electric shock.

• Never lay themains lead over hot surfaces or pull it round

sharp edges or corners. Position themains lead in such away

that it will not be trodden on or tripped over.

2. Product description

• Two rollers

• Capacity: 250 mm/min 80–100 µm, maxA4

• 3-min warm-uptime

• Max. paper thickness: 0.5mm

• Reverse feature for correcting misfeeds

• Power output: 210W

1. Film feedslot

2. [ 0/1 ] Power switch

3. POWER Red LED indicator

4. READY Green LED indicator

5. [ ABS ] Reverse function

6. Output chute

3. Operation

Make sure thepower switch (2) is set to 0 before plugging it into

awall socket.

1. Plugit into awall socket and set thepower switch (2) to

theIposition. Thered LED (3) will light to indicate that

thewarm-up phase hasbegun.

2. Thegreen LED will light after about three minutes indicating

that thelaminator is ready for use. Makesure that there is

sufficient room behind themachine to allow thelamination to

exit themachine freely.

3. Flipopen thelamination film and insert thepaper to be

laminated. Allowat least 3–10 mm clearance at thesealed

edge when inserting. Makesure thepaper is not crooked.

4. Feedthesealed end of thelamination film into thefeed

slotfirst. Note: Thisis very important; otherwise,

thelamination film can become caught in therollers.

5. Lettheentire lamination exit freely. Donot pull it out with force.

Letit cool before handling it. Placeaflat heavy object, like

abook over thelaminate while cooling if you want your results

to be extra smooth andflat.

6. Setthepower switch to 0 and unplug thelaminator when you

have finished usingit.

Note:

• Selectthecorrect size of lamination film so that it fits

theobject to be laminated.

• Avoidplacing several small pieces of paper into asingle

lamination sheet.

• Remember that thelaminate’s total thickness may not

exceed0.5mm.

• Donot feed in empty lamination film.

• Donot cut thelamination film into smaller pieces before

feeding it through themachine.

• Donot feed thefilm into themachine at anangle.

Itcanbecome caught in themachine during

thelaminationprocess.

• Useonly lamination film. Nevertry to feed in any other

typeofmaterial.

• Ifyou intend to laminate in series, remember themachine

needs to rest at least 15 seconds between every lamination.

• Donot feed in any material that is sensitive toheat.

The laminator is intended for personal use only and should not be

used continuously. Werecommend that you turn off themachine

and let it cool down for approximately 30 minutes after two

minutes ofuse.

Reverse feature for correcting misfeeds

The machine has a feature which allows the laminate to be pulled

out from the front. If the lamination film misfeeds or jams:

1. Turn off the laminator immediately by turning the power switch

to the 0 position and then unplug it.

2. Hold in the [ABS] button and extract the laminate.

4. Care and maintenance

Unplug thelaminator from thewall socket and wipe it with

asoft,damp cloth when needed. Neveruse strong detergents

orsolvents.

5. Disposal

This product should be disposed of in accordance with local

regulations. Ifyou are unsure how to proceed, contact your

localauthority.

6. Specifications

Rated voltage 220–240 V AC, 50Hz

Power 210 W, 1.2A

Max lamination width 230mm

Speed 250 mm/minute

Recommended

lamination film thickness 80–100 microns

Dimensions 320×86×86mm

1 2 3 4 5 6

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Exibel L402-A Laminator. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Exibel. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Exibel L402-A Laminator på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Exibel Laminatorer
Flere håndbøker for Laminatorer

Relaterte produkter

Bruksanvisning

Exibel LA4G Laminator

Bruksanvisning

Exibel L303-A Laminator

Bruksanvisning

Exibel LA4K Laminator

Bruksanvisning

Exibel LA3G Laminator

Bruksanvisning

Rexel LV250HS Laminator

Bruksanvisning

Peach PL102 Laminator

Bruksanvisning

GBC Fusion 3100L Laminator

Bruksanvisning

Leitz iLAM Office A3 Laminator

Relaterte kategorier