Bruksanvisning Exibel FX-250 Walkie-talkie

Bruksanvisning

GREAT BRITAIN - CUSTOMER SERVICE contact number: 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

English

6

7

8

9

1

2

3

4

5

Ver. 20140519

FX-250 Walkie-Talkie

Art.no 38-6327 Model FX250

Please read theentire instruction manual before using theproduct and then save

it for future reference. We reserve theright for any errors in text or images and any

necessary changes made to technicaldata. In theevent of technical problems or

other queries, please contact our Customer Services.

PMR446

PMR446 is alicence-free communication standard for use over theFM frequency

range and operates at 446 MHz.

Coverage area/range

Range capacity is highly dependant upon thesurrounding terrain. Maximum range

is achieved in open unobstructed terrain,e.g. intheabsence of hills/mountains,

buildings,etc. Toavoid interference, theradios should not be used at adistance of

less than 1.5 m from eachother.

Safety

• Never expose theradio, charger or mains adaptor to damp or moisture.

• Use only theincluded or recommended charger.

• Only use rechargeable NiMH batteries.

• When using aheadset, you should avoid having thevolume at maximum level

to protect your hearing.

• Always remove thebatteries from thedevices if they are not used for

alongtime.

• In order to avoid unnecessary radio wave exposure, always hold thehandset

at least 5 cm from your mouth while transmitting.

• Do not use handsets if any one of their aerials have been damaged.

• Always turn off theradios when requested,e.g. during explosive demolition

work or where there is risk for explosion in environments where flammable

liquids or gases are involved.

Buttons and functions

Transmitting

• 2-way radios can only operate in half-duplexmode. Thismeans that

you cannot receive atransmitted signal whilst you yourself are speaking/

transmitting (known as simplex communication).

• PMR446 is alicence-free frequency band that is shared amongst manyusers.

Ifmore than one user is found on thechannel that you are using it is customary

to identify yourself both at thebeginning and theend of any conversation.

Receiving

Thehandsets are constantly in reception mode when turnedon. Whenasignal is

received, the

symbol will appear on thedisplay.

Transmitting

1. Press and hold in the [ PTT ] button (1). Thedisplay’s transmitting indicator

willlight.

2. Hold thehandset vertically with themicrophone (9) about 5 cm from your

mouth. Speakin aclear normal tone of voice without resorting to yelling.

3. Always wait asecond after you have pressed the [ PTT ] button before you

begin talking.

4. Always wait asecond after pressing the [ PTT ] button to end atransmission

and wait for theother user to begin talking.

5. Be careful not to press the [ PTT ] button while theother user is still talking.

Trynot to transmit before theother person has finished their transmission.

Call signal

Acall signal may be sent in order to alert other users of your intention totransmit.

This requires any other users to have their handsets within range and set to

thesame channel as your transmitting handset.

Call signal transmission: Press [ ]. Yourtransmitting handset will then send out

a2-sec call signal to all devices sharing thesame channel.

Roger beep

When you have finished talking and have released thePTT button aroger beep will

automatically be sent letting any receivers know that you have finished speaking

and are ready for aresponse.

Automatic channel scan

Thehandsets can be used to automatically scan for channels with traffic.

1. Hold in [

] and [ ► ] simultaneously to start scanning.

2. Once atrafficked channel is found scanning will pause for 3 seconds.

3. Pressing [ PTT ] within this 3 sec window will transmit asignal on this channel

or if you prefer you can use the [ ◄ ] or [ ► ] buttons to manually browse

and select achannel. If [ PTT ] is not pressed within the3 sec time window

scanning will continue automatically.

4. Press [ PTT ] at any time to cancel scanning.

Monitor mode

Themonitor feature can be used to check for other weak signals on thecurrent

channel.

1. To activate themonitor function press [ ◄ ] and [ ► ] simultaneously.

2. If no other channels are found, all you will hear is whitenoise.

3. Press [

] to deactivate monitormode.

Key lock

Thekey lock does not influence call signal transmission, regular transmission or

reception.

Key lock activation: Holdin [

] until shows in thedisplay.

Key lock deactivation: Holdin [ ] until disappears from thedisplay.

FM radio

1. Shortly press [ ] to turn theradioon.

2. Shortly press or hold in [ ◄ ] or [ ► ] to find adesired station.

3. Shortly press [

] to turn theradiooff.

Headsets

Connect theincluded headset to theheadset socket (6). Theheadset is equipped

with aPTT transmission button.

Care and maintenance

• Always remove thebatteries if theproduct is not to be used for alongtime.

• Clean theproduct using alightly moistenedcloth. Useonly mild cleaning

agents, never solvents or corrosive chemicals.

Troubleshooting

Bad/no

reception/

transmission

• Thetransmitter is located outside of thereceiver’srange.

• Thereceiver or transmitter are set to different channels.

• Volume level too low – increase thevolume.

• Surroundings affecting reception. Moveto anarea

without obstacles or sources of interference.

• Thedevice is held too close to thebody – keep

thedevice abit away from thebody.

• Theother user is too close – keep adistance of at least

1.5 m between eachother.

• There are other users on thechannel causing

adisturbance – try to find another channel.

Thehandset/s

do not charge.

• Make sure that thecharge cable and its plug are

securely connected to thecharging station/device and to

afunctioning powerpoint.

• Are thebatteries in good enough condition to retain

acharge?

• Is there power at thepower point where charge cable is

connectedto?

Disposal

This product should be disposed of in accordance with local regulations.

Ifyou are unsure how to proceed, contact your local council.

Specifications

PMR devices

Number of channels 8

Frequency range 446.00625–446.09375 MHz

Outputpower 500mW

Range Upto 5 km

Frequency table

Channel Frequency (MHz) Channel Frequency (MHz)

1 446.00625 5 446.05625

2 446.01875 6 446.06875

3 446.03125 7 446.08125

4 446.04375 8 446.09375

Charger

In 100–240 V AC, 50/60 Hz

Out 5 V, 500mA

1. [ PTT ] Transmit button (push to talk)

2. [

] On/off

3. [ ] Transmits acall signal to other

receivable PMR handsets

4. [ ◄ ] Volume down, toggles settings

back/down

5. Speaker

6. Headset socket and Micro USB

charge port

7. [

] Channel and function selector

8. [ ► ] Volume up, toggles settings

forwards/up

9. Microphone

Display symbols

Channel number

Battery status

Scanning active

FM radio

Key lock active

PPT transmission or ringtone

Signal reception

Volume

2. Pull theclip away from the

handset while simultaneously

sliding it upwards.

3. Slide thebattery compartment’s cover

upwards toopen.

4. Insert 3×AAA/HR03 per handset (batteries included). Notethepolarity

markings in thebattery compartment to ensure correct battery insertion.

5. Refit thebattery compartment cover and thebelt clip (if used).

Charging

Individual handset charging

1. Make sure thehandset is turned off before charging.

2. Connect theincluded adaptor to thehandset’s charge socket (6) and to

anavailable powerpoint.

3. Thecharge status icon will show in thedisplay.

4. Afull charge is achieved from acompletely flat battery after about 10h.

Always charge new batteries for 14 hours beforeuse.

Charging station

Changing theEU and UK charge plug adaptors:

1. Press the [ PUSH ] symbol at thebottom

of thecharger and slide out theattached

adaptor.

2. Slide thedesired adaptor in by making sure

that you hear it lock securely intoplace.

Operating instructions

Batteries

Note: Always use thesame type of batteries. Nevermix new and discharged

batteries or rechargeable with non-rechargeable batteries.

1. Open thebattery compartment by first removing thebelt clip (if attached).

3. Turn thehandsetsoff.

4. Connect theincluded adaptor to thecharging station and to anavailable

powerpoint.

5. Place thehandsets into thecharge station. Theywill only fit in oneway.

Thecharging station’s LED indicator will continue to be lit as long as

thehandsets remain in thecharge station.

6. Afull charge is achieved from acompletely flat battery after about 10h.

Always charge new batteries for 14 hours beforeuse.

Battery status symbol

• Thebattery symbol (see theDisplay symbols section above) reflects thestate

of battery charge and will show full once thebatteries are fully charged.

• Once thehandset’s batteries reach thepoint of empty, they will first give off

anaudible signal before shuttingoff.

Power save mode

• Thehandsets have anintegrated auto power-saving mode in order to save

batterylife. After4 sec of disuse thehandsets will automatically enter power-

savemode.

• This does not affect thehandsets’ ability to receive signals. Thehandsets

automatically return to normal mode with normal power whenever asignal is

received.

• Make ahabit of always turning thePMR off when it is not in use, in order to

save batterypower.

Power on/off

Poweron: Holdin [ ] until anaudible signal is heard and thecurrent channel is

displayed.

Poweroff: Holdin [

] until anaudible signal is heard and thedisplay switchesoff.

Adjusting the volume

Use the [ ◄ ] [ ► ] buttons for increasing or reducing volume to thedesiredlevel.

Channel selection

1. Press [ ], until thechannel display begins toflash.

2. Then press [ ◄ ] or [ ► ] to select thedesired channel.

3. Press [ ] to confirm.

Declaration of Conformity

Hereby, Clas Ohlson AB declares that following product(s):

38-6327 EXIBEL FX-250

PMR (446 MHz) COMMUNICATION RADIO

is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

Article 3.1a (Safety): EN 60950-1

Article 3.1b (EMC): EN 301489-1

EN 301489-5

Article 3.2 (Radio): EN 300296-2

Insjön, Sweden, May 2014

Klas Balkow,

President.

Clas Ohlson, 793 85 Insjön, Sweden

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Exibel FX-250 Walkie-talkie. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Exibel. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Exibel FX-250 Walkie-talkie på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Exibel Walkie-talkie
Flere håndbøker for Walkie-talkie