Bruksanvisning Exibel BTK-729 Bilsett

Bruksanvisning

GREAT BRITAIN - CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk

English

1

2

3

4

5

6

Ver. 20151217

Wireless Headset

Art.no 38-7363 Model BTK-729

Please read theentire instruction manual before using theproduct

and then save it for future reference. Wereserve theright for any

errors in text or images and any necessary changes made to

technicaldata. Intheevent of technical problems or other queries,

please contact our Customer Services.

Safety

• Check your local regulations regarding mobile phone use in

combination with driving.

• Shut off both theheadset and mobile phone in areas where you

are requested to do so, such as in hospitals, aircraft or explosive

environments.

• Use only theincluded USB lead to charge theheadset.

• Do not let children play with theheadset.

Things to consider:

• Other wireless equipment using thesame frequency band can

reduce thetransmissionrange.

• Therange of all wireless equipment depends on thetype of

obstacles located between thetransmitter and thereceiver

(e.g. aconcrete wall will interfere with thesignal more than

aplasterboard wall).

If you experience problems, try thefollowing:

• Turn off any other existing wireless equipment to check whether

this is thecause of theproblem.

• Move any other existing wireless equipment. Shorten thedistance

between thesending and receiving devices and reduce

thenumber of obstacles (walls, furniture,etc.) betweenthem.

Buttons and functions

Charging

Note: Theheadset cannot make or receive calls while it is being charged.

1. Connect theincluded USB cable to theheadset and to asuitable

USB charger (e.g. computer or other mains charger).

2. TheLED indicator shines red when charging is in progress.

3. Charging takes 1–2 hours, and when thebattery is fully charged

theLED indicator will shine asolidblue.

4. If theLED indicator changes from blue to red during use,

itmeans that thebattery needs charging.

Turning the headset on

Press and hold [ ] for approx. 3seconds Theheadset will beep,

theLED indicator will emit 3 blue flashes and theheadset will turnon.

Turning the headset off

Press and hold [ ] for about 5 seconds. Theheadset will beep,

theLED indicator will flash red and theheadset will switchoff.

Connecting the headset to a mobile phone via Bluetooth

1. Check that theheadset is switchedoff.

2. Press and hold [ ] for about 4 seconds until theLED indicator

flashes alternately between red andblue.

3. Activate Bluetooth on themobile phone that is to be paired with

theheadset and set it to scanmode.

4. Theheadset will appear as BTK‑729 on your mobilephone.

Select this as thedevice to be connected. Referto your mobile

phone’s instruction manual if you are unsure. TheLED indicator

will stop alternately between red andblue.

5. TheLED indicator will flash twice once theheadset has been

successfully connected.

Note: Ifyou are prompted to enter aPIN code on your mobile

phone, you should enter 0000 (four zeroes). Certain mobile

phones may also require you to approve theconnection.

6. TheLED indicator will flash quickly once every 4th second once

theheadset and mobile phone have been successfully paired.

7. Thenext time theheadset is switched on it will automatically

connect to themobilephone.

Connecting the headset to a second mobile phone

via Bluetooth

Theheadset can be connected to 2 mobile phones at

thesametime. Procedure:

1. Connect thefirst mobile phone to theheadset as

describedabove.

2. Turn off Bluetooth on thefirst mobilephone.

3. Turn off theheadset and turn it back on again by pressing and

holding in [

] until theLED indicator begins flashing alternately

between red andblue.

4. Enable Bluetooth on thesecond smartphone and begin ascan

for new devices.

5. Select BTK‑729 and enter 0000 if you are prompted to enter

aPINcode.

6. Once thesecond mobile has been connected, you can safely

turn Bluetooth back on thefirst mobilephone.

Accepting an incoming call

• Theheadset emits anaudible signal if anincoming call is

received, press [ ] once to answer thecall.

• You can also answer thecall by pressing thecorresponding

button on your mobilephone.

Ending a call

• Press [ ] once to end acurrentcall.

• You can also end thecall by pressing thecorresponding button

on your mobilephone.

Transferring calls from the headset to a mobile phone

• Hold down [ ] for 2 seconds to transfer acall from theheadset

to your mobilephone.

• Hold down [ ] for 2 seconds again to transfer thecall back to

theheadset.

Redialling the last number called

Press [ ] twice in quick succession to redial thelast number called.

Rejecting calls

When anincoming call has been received, hold down [ ] for

2seconds to reject thecall.

Voice dialling

• Hold down [ ] for 2 seconds and say thename of thecontact

you wish to ringup.

• Press and hold [

] again for 2 seconds to turn thefunctionoff.

Note: Thisfunction only works if your mobile phone supports voice

dialling.

Volume adjustment

Use thevolume button (2) to adjust thevolume.

Care and maintenance

• Avoid exposing theheadset to moisture, damp, high

temperatures and humidity.

• Clean theheadset using alightly moistenedcloth. Useonly mild

cleaning agents, never solvents or corrosive chemicals.

Troubleshooting guide

The LED indicator shines a solid red

Theheadset needs charging. Connect theheadset to acomputer or

other USB charger. SeetheCharging sectionabove.

The headset cannot connect to the mobile phone

• Make sure that both theheadset and thephone are fully charged

and try to reconnectlater. Referto theConnecting theheadset to

amobile phone via Bluetooth sectionabove.

• Make sure that thedistance between units is no more than

10metres and that there are no electrical or other devices that

might cause interference betweenthem.

• If none of theabove solutions help, refer to themobile phone’s

operating instructions.

Responsible disposal

This symbol indicates that this product should not be

disposed of with general householdwaste. Thisapplies

throughout theentire EU. Inorder to prevent any

harm to theenvironment or health hazards caused by

incorrect waste disposal, theproduct must be handed

in for recycling so that thematerial can be disposed of

in aresponsible manner. Whenrecycling your product,

take it to your local collection facility or contact theplace

of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

Range 10m

Bluetooth 4.0 Class II

Talktime 4.5hours

Standbytime 250hours

Size (L×W×H) 55×14×8.2 mm

1. Earloop

2. Volume control

3. [

] Power switch, pairing, answer/end call, voice dialling,

calltransfer, redial, rejectcall.

4. Earpiece

5. LED indicator

6. Charger socket

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Exibel BTK-729 Bilsett. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Exibel. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Exibel BTK-729 Bilsett på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Exibel Bilsett
Flere håndbøker for Bilsett