Bruksanvisning Dremel 3D45 3D-skriver
Trenger du en bruksanvisning for Dremel 3D45 3D-skriver? Nedenfor kan du se og laste ned PDF-bruksanvisningen gratis på norsk. Dette produktet har for øyeblikket 1 vanlige spørsmål, 0 kommentarer og har 0 stemmer. Hvis dette ikke er bruksanvisningen du ønsker, vennligst kontakt oss.
Er ditt produkt defekt og finner du ikke løsningen i bruksanvisningen? Dra til en Repair Café for gratis hjelp til reparasjon.
Bruksanvisning
Loading…
mouth. Dremel lament is not suitable for food
or drink preparation and food utensils. Such use
of objects created by Dremel 3D45 may result in
illness or personal injury.
n. Do not use Dremel 3D45 to create objects
intended for chemical storage. Dremel lament
is not suitable for chemical storage. Such use of
objects created by Dremel 3D45 may result in
property damage and personal injury.
o. Do not modify Dremel 3D45 or alter factory
settings. Modications may result in equipment
and property damage, and personal injury.
p. Do not expose Dremel 3D45 to temperatures
exceeding 70°C (158°F). Dremel 3D45 may
become damaged. Dremel 3D45 is intended to
operate in temperature between 16-29° C
(60 - 85° F).
q. Do not move or bump Dremel 3D45 or the
extruder during operation. The object may build
incorrectly.
r.
building process is completed, stopped, or
paused. Changing the lament during building will
cancel the object and may damage the extruder.
s.
by the touch screen. Doing so may damage the
extruder.
t. Use extra care not to damage the extruder tip
when clearing debris. Dremel 3D45 will not work
properly with damaged extruder tip and will require
replacement.
u. Before every build make sure that the build
Use of improper glue may result in equipment
damage and poor object build quality.
v. Be aware of your body position when using
hand tools to remove objects from the build
platform. Sudden tool slip and improper body
position during object removal from the build
platform may result in personal injury.
w. Avoid scratching the build platform when
removing objects. Scratches in the build platform
will result in improper object creation.
x. Do not drop the build platform. Tempered glass
plate may break and result in personal injury.
y. Do not remove tempered glass plate from
plastic holder. Contact with tempered glass plate
edge may result in personal injury.
z. Do not twist or bend the build platform while
removing objects. Tempered glass plate may
separate from plastic holder and result in personal
injury.
aa. Dremel is not responsible for structural integrity
or utility of objects created using Dremel
3D45. Structural models created by inexperienced
designers may result in property damage and
personal injury.
SERVICE
a. Always unplug Dremel 3D45 from its power
before performing any service procedures.
Failure to do so may result in personal injury and
equipment damage.
b. Have your Dremel 3D45 serviced only by an
authorized Dremel service centre using only
Dremel replacement parts. This will ensure that
proper operation and safety of Dremel 3D45 is
maintained.
c. Use only Dremel approved components. Use
of components other than genuine Dremel
®
components may void warranty.
d. Use of
ORIGINAL INSTRUCTIONS
GENERAL SAFETY WARNINGS
!
WARNING
READ ALL
INSTRUCTIONS IN THIS
MANUAL AND FAMILIARIZE YOURSELF
WITH THE DREMEL 3D45 BEFORE SETUP
AND USE. FAILURE TO COMPLY WITH THE
WARNINGS AND INSTRUCTIONS MAY RESULT IN
FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE,
OR PERSONAL INJURY. SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE REFERENCE
Please note that the contents of the
Quick Start Guide and Instruction
Manual may change and evolve over
time. You can access the most
up-to-date version online at
www.dremel3d.com.
WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b. Do not operate Dremel 3D45 in the presence of
Dremel 3D45
creates high temperatures which may ignite the
dust or fumes.
c. Store idle 3D45s out of reach of children and
other untrained persons. Injury can occur in
hands of untrained users.
ELECTRICAL SAFETY
a. Always use the Dremel 3D45 with a properly
grounded outlet. Do not modify Dremel 3D45
plug. Improper grounding and modied plugs
increase risk of electric shock.
b. Do not use Dremel 3D45 in damp or wet
locations. Do not expose Dremel 3D45 to rain.
Presence of moisture increases risk of electric
shock.
c. Do not abuse the cord. Never use the cord for
pulling or unplugging the Dremel 3D45.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
d. Avoid using this product during an electric
storm. There may be a remote risk of a power
surge from lightning that may result in an electric
shock.
e. In case of emergency unplug Dremel 3D45 from
outlet.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and
use common sense when operating a Dremel
3D45. Do not use Dremel 3D45 while you are
or medication. A moment of inattention while
operating Dremel 3D45 may result in personal
injury.
b. Use personal protective equipment. The use of
protective equipment such as heat resistant gloves
and safety glasses will reduce the risk of personal
injuries.
c. Dress properly. Do not wear loose clothing or
Jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, Jewellery
or long hair can be caught in moving parts.
DREMEL 3D45 USE AND CARE
a. Before every use check Dremel 3D45 for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the Dremel 3D45’s operation.
If damage is suspected then have the Dremel
3D45 repaired by an authorised Dremel service
centre before use. Use of Dremel 3D45 when
damaged may result in poor quality of object
creation, further equipment damage, property
damage or personal injury.
b. Do not touch the extruder tip or heated build
platform during Dremel 3D45 operation or until
it has cooled down to at least 60°C (140°F).
Contact with the extruder tip or heated build
platform during or after operation before tip has
cooled may result in personal injury.
c. Set up the Dremel 3D45 in a well-ventilated
of unobstructed spacing around Dremel 3D45.
Dremel 3D45 melts plastic during building. Plastic
odours emitted during Dremel 3D45 operation
may irritate eyes and airways. Locating Dremel
3D45 close to surrounding objects prevents proper
ventilation.
d. Do not reach inside the Dremel 3D45 while it is
in operation. Contact with Dremel 3D45 moving
parts during operation may result in poor build
quality, equipment damage or personal injury.
e. Always monitor the Dremel 3D45 during
operation. Use of Dremel 3D45 by persons
unfamiliar with these warnings and instructions may
result equipment or property damage and personal
injury.
f. Use of lament not
authorized by Dremel may result in equipment,
property damage or personal injury.
g. Do not adjust extruder/nozzle setting to
exceed the maximum rated temperature of the
Heating lament above
recommended range can cause emissions that may
result in personal injury.
h. Ensure small objects created by Dremel 3D45
are not accessible to young children. Small
objects are potential choking hazards for young
children.
i. Do not create illegal or inappropriate objects
using Dremel 3D45.
j. Do not use Dremel 3D45 to create objects
intended for use with candles, liquid fuels,
and other heat sources. Plastic may melt when
exposed to re or other heat sources. Such use of
objects created by Dremel 3D45 may result in re,
property damage and personal injury.
k. Do not use Dremel 3D45 to create objects
intended for food or drink applications
such as preparation, decoration, storage, or
consumption. Such use of objects created by
Dremel 3D45 may result in illness or personal
injury.
l. Do not use Dremel 3D45 to create objects
intended with use with electrical components
or housings of electrical components. Dremel
lament is not suitable for electrical applications.
Such use of objects created by Dremel 3D45 may
result in property damage and personal injury.
m. Do not put plastic objects in or around your
GB
2
Loading…
Vurdering
La oss få vite hva du syns om Dremel 3D45 3D-skriver ved å gi en produktbedømmelse. Vil du dele dine erfaringer med dette produktet eller stille et spørsmål? Legg igjen en kommentar nederst på siden.Mer om denne håndboken
Vi forstår at det er fint å ha en papirhåndbok for Dremel 3D45 3D-skriver. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Dremel. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Dremel 3D45 3D-skriver på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.
Spesifikasjoner
| Merke | Dremel |
| Modell | 3D45 |
| Kategori | 3D-skrivere |
| Filtype | |
| Filstørrelse | 24.82 MB |
Alle bruksanvisninger for Dremel 3D-skrivere
Flere håndbøker for 3D-skrivere
Ofte stilte spørsmål om Dremel 3D45 3D-skriver
Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.
Hva står PLA og ABS for? Verifisert
PLA står for PolyLactic Acid og er laget av organiske materialer. PLA har et relativt lavt smeltepunkt. BSA står for Acrylonitrile Butadiene Styrene og er laget av råolje. BSA har et relativt høyt smeltepunkt.
Det var nyttig (9) Les mer
Bli med i samtalen om dette produktet
Her kan du dele hva du synes om Dremel 3D45 3D-skriver. Hvis du har et spørsmål, les først bruksanvisningen nøye. Be om en bruksanvisning kan gjøres ved å bruke vårt kontaktskjema.