Bruksanvisning Cotech FIB75600v1-PT Plantelampe

Bruksanvisning

UITED KINGDOM internet www.clasohlson.co.uk

Ver. 20220516

LED Grow Light

Art.no 36-8557 Modell FIB75600v1-pt

Please read theentire instruction manual before using theproduct and

then save it for future reference. We reserve theright for any errors in text or

images and any necessary changes made to technical data. In theevent of

technical problems or other queries, please contact our Customer Services.

Safety

Warning:

• Do not use thelight if it or its mains lead and plug are damaged in

any way.

• Thelight should only be connected to awall outlet with a230 V,

50 Hz power supply.

• Do not mount thelight in anenvironment where it is exposed to

water, moisture or extreme temperatures.

• Never try to open theproduct, repair or modify it in any way.

Electric shock hazard

• Thebulb in this light fitting must only be replaced by aqualified

electrician.

• Installation and maintenance work on theproduct involves therisk

of anelectric shock.

• If themains lead is damaged it must be replaced by a cable of

identical specifications as theoriginal.

Connecting thelights using aconnector

This product is intended for indoor use only.

Connecting several lights together

Up to 10 light fittings can be interconnected. There are two different

ways of connecting thelights together:

1. Thefirst is with aconnector, which enables thelights to be joined

end to end.

2. Thesecond is using aseries connection cable, which enables

thelights to be joined about 10 cm apart (handy for corner mounting).

1. Push thesupplied connector into

themains socket on thelight fitting.

2. Connect thetwo lights together. Make sure that theconnector is securely

inserted and that both lights are securely connected to each other.

3. Repeat thesame procedure if you wish to connect additional lights.

Connecting thelights using aconnection cable

Installation

Warning:

Ensure that there are no electrical wires or water pipes in theceiling or

wall where you intend to drill/screw.

1. Mount theceiling bracket using thescrew. Use amasonry drill and

wall plug to create ananchor hole if necessary.

• Plant illumination time: Most plants grow better when not exposed

to 24-hour light, they also require aperiod of darkness.

We recommend that thegrow light is used with atimer.

Handy tip

• It is agood idea to connect thelight fitting/s to awall socket which

is controlled by anon/off switch.

Class II luminaire.

Thelight bulb is not dimmable.

Switch thelight fitting on and off

by pressing thepower switch.

1. Use thesupplied series connection cable to connect thefirst light to

thesecond.

2. Repeat thesame procedure if you wish to connect additional lights.

Care and maintenance

• Thelight fitting should be cleaned using adry cloth or vacuum cleaner.

• Unplug thelight fitting from thewall socket if theproduct is not be

used for anextended period.

Instructions for use

Note

• Distance: Theintensity of thelight is inversely proportional to

thesquare of thedistance from thesource, which means that if you

double thedistance between thelight and anobject, only aquarter

of thelight will reach theobject. It is therefore important that

thelights are as close as possible to theplants and equally spaced.

Troubleshooting guide

Thelight

doesn’t

come on.

• Check that thelight is turned on.

• Make sure that themains lead is undamaged and

is securely connected to both thewall socket and

thelight.

• Is thewall socket energised?

• Check that any interconnected lights are intact and

properly connected to each other.

Responsible disposal

This symbol indicates that this product should not be

disposed of with general household waste. This applies

throughout theentire EU. In order to prevent any harm to

theenvironment or health hazards caused by incorrect waste

disposal, theproduct must be handed in for recycling so that

thematerial can be disposed of in aresponsible manner. When

recycling your product, take it to your local collection facility or contact

theplace of purchase. They will ensure that theproduct is disposed of

in anenvironmentally sound manner.

Specifications

Rated voltage 220–240 V AC, 50/60 Hz

Mains lead 1.8 m

Bulb LED

Photosynthetic photon flux

PPF 17 μmol/s

PPFD @20 cm 10 μmol/m²/s

Wavelength Blue 450 nm

Red 660 nm

Series connection cable 20 cm

Wattage 8.5 W

IP rating IP20

Operating temperature −30 ºC to +40 ºC

Dimensions 600×24×35 mm

2. Press thelight fitting into thebrackets until it clicks into place.

3. Plug themains lead into awall socket.

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Cotech FIB75600v1-PT Plantelampe. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Cotech. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Cotech FIB75600v1-PT Plantelampe på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Cotech Plantelamper
Flere håndbøker for Plantelamper

Relaterte produkter

Bruksanvisning

Cotech FIB72800v1-PT Plantelampe

Bruksanvisning

WMF Ambient Plantelampe

Bruksanvisning

Venso PFLi-RBC-600-1-35 Quattro Plantelampe

Bruksanvisning

Tregren T6 Plantelampe

Bruksanvisning

Bosch MSGP3L SmartGrow Life Plantelampe

Bruksanvisning

Tregren T3 Plantelampe

Bruksanvisning

Bosch MSGP3 SmartGrow 3 Plantelampe

Bruksanvisning

Tregren T12 Plantelampe

Relaterte kategorier