Bruksanvisning Cocraft HL-XW20 Hageslangetrommel

Bruksanvisning

GREAT BRITAIN

•

CUSTOMER SERVICE

tel. 020 8247 9300 web: www.clasohlson.co.uk

e-mail: customerservice@clasohlson.co.uk

1

2

3

4 5

Version 20141120

Hose Reel

Art.no 31-8266, 31-8267

Model HL-XW20, HL-XW40

Please read theentire instruction manual before using

theproduct and then save it for future reference.

Wereserve theright for any errors in text or images

and any necessary changes made to technicaldata.

Intheevent of technical problems or other queries,

pleasecontact our Customer Services.

Product description

Operating instructions

1. Thereel is equipped with abrake to help lock

thehose at thedesired length. Pullthehose out of

thereel and carefully release some tension to activate

thehosebrake.

2. To rewind thehose, pull it out about 20 cm to

disengage thebrake and then let thehose rewind.

Toavoid damage to thereel, keep hold of thehose

while it rewinds.

Note:

Thehose must not be under pressure when it is being

rewound; open thenozzle, turn off thewater and let all

thewater run out before rewinding thehose.

Care, maintenance and storage

• Theexterior of thehose reel can be cleaned by wiping

with adampcloth. Useonly mild cleaning agents,

never solvents or corrosive chemicals.

• Open theinspection hatch from time to time and

remove any leaves or debris that thehose may have

picked up on its way into thereel.

Note:

Protect thehose reel fromfrost. Always store your hose

reel away before thefirst frost sets in, make sure that

thehose has been drained of water before putting itaway.

Disposal

This product should be disposed of in accordance with

local regulations. Ifyou are unsure how to proceed,

contact your local council.

Specifications

31-8266

Hose Ø ½″/1.3 cm

Hose length 20m

31-8267

Hose Ø ½″/1.3 cm

Hose length 40m

1. Water supply feederhose

2. Wall bracket

3. Pivot/lockingpin

4. Carrying handle

5. Inspectionhatch

Installation

1. Using thewall bracket

as aguide, mark

out theposition of

themountingholes.

Note: Makesure that there

are no water pipes or electrical

cables hidden in thewall

where you intend todrill.

2. Screw thebracket to thewall

using suitable screws and

wall plugs for thewall

material.

3. Place thehose reel onto

thebracket and insert

thelockingpin. Thelocking

pin has aholder for

thefeeder hose when

thehose is not connected

to atap.

4. Connect thefeeder hose to

yourtap.

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Cocraft HL-XW20 Hageslangetrommel. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Cocraft. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Cocraft HL-XW20 Hageslangetrommel på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Cocraft Hageslangetromler
Flere håndbøker for Hageslangetromler