Bruksanvisning Cocraft FL-159 Limpistol

Bruksanvisning

UNITED KINGDOM • www.clasohlson.co.uk

1

4

5

67

2

3

Ver. 20220204

Glue Gun

Art.no 41-2581 Model FL-159

Please read theentire instruction manual before using theproduct and then save

it for future reference. Wereserve theright for any errors in text or images and any

necessary changes made to technicaldata. Intheevent of technical problems or

other queries, please contact our Customer Services.

Safety

Symbol guide

Caution! The nozzle and adjoining surfaces become hot during use.

Contact may cause burns.

Class II product. Double-insulated.

Warning for apossible hazard which could lead to serious personal injury

and/or damage to theproduct if thestated instructions are not followed.

Warning for anelectrical shock hazard.

Unplug theproduct immediately if themains lead has been damaged

or when inspectingit.

Use respiratory protection.

General safety instructions

• This product must not be used by anyone (including children) suffering from

physical or mental impairment. Thisproduct should not be used by anyone

that has not read theinstruction manual unless they have been instructed

in its use by someone who will take responsibility for their safety. Neverlet

children play with theproduct.

• Keep children away from thepackaging materials. Choking hazard.

• Theproduct should not be used if it is in any way damaged or malfunctioning.

• Never attempt to modify theproduct in anyway.

• Any repairs should only be carried out by qualified service technicians.

Electrical safety

Warning for anelectrical shock hazard.

• Do not use theproduct if it is missing parts or if its housing has

been damaged in anyway.

• Do not place theproduct where there is arisk of it falling into water or other

types of liquid.

• Theproduct should only be connected to a220−240 V, 50 Hz electrical outlet.

• Outdoor use of theproduct requires that any wall socket used be equipped

with amax 30 mA RCD. ChecktheRCD before eachuse. Useof anRCD

reduces therisk of electricshock.

• Themains lead should be checked regularly. Neveruse theproduct if

themains lead or plug is damaged.

• If themains lead has been damaged, it must only be replaced by

themanufacturer, authorised service facility or qualified tradesman.

Thisis to prevent therisk of electric shock orfire.

• Never touch themains plug if your hands are moist orwet.

• Always grip theplug when unplugging theproduct, never pull themainslead.

• Never carry or hang theproduct by its mainslead.

Product specic safety instructions

• Place theproduct in astanding position after use and let it cool sufficiently

before putting it away for storage.

• Do not leave theproduct unsupervised when it is connected to anelectrical socket.

• Never cover theproduct when it is connected to anelectrical socket.

• Never expose theproduct to rain or moisture.

• Always disconnect themains lead from thewall socket when you have

finished work or when theproduct is not beingused.

• Unplug theproduct and let it cool completely before putting it away for storage.

• Both theglue and nozzle become very hot duringuse. Thiscan cause burn

injuries. Rinse any burn with cold water and keep it under running water for

sometime.

• Only use glue sticks specifically designed for this product.

• Always place theproduct on its stand when it is not inuse.

Product description

Contents

• 1 × gluegun

• 6 × glue sticks, Ø 11×150mm

Application

This glue gun can be used for gluing wood, paper, cardboard and certain plastic

materials.

Glue gun

1. Nozzle

2. Glue stickhole

3. Gluestick

4. Handle

5. Mainslead

6. Trigger

7. Stand

• Plug theglue gun into anelectrical socket and rest it on its stand (7) for

3–5minutes to let it reach operating temperature.

Gluing

Use respiratory protection.

Warning: Burnhazard. Themolten adhesive and nozzle

reach temperatures of up to 200 °C. Avoidall skin contact

with thenozzle (1) and molten adhesive whilst working.

1. Grip theglue gun by thehandle (4) and insert aglue stick into thehole (2) at

therear of thegun.

2. Squeeze thetrigger (6) afew times until thefeed mechanism has gripped

thegluestick.

3. Gently squeeze thetrigger to apply molten adhesive to thesurfaces to be

glued together.

4. Release thetrigger and squeeze it again if thetrigger was squeezed all

theway in before you had finished applying glue to thecontact surfaces.

5. Release thetrigger when thesurfaces have been coated withglue.

6. Immediately press thesurfaces together and hold them in position for

15seconds.

7. Let any excess glue cool and remove it with asharpknife.

8. Unplug theglue gun from thewall socket to switch thegunoff.

9. Rest theglue gun on its stand to cool completely before putting itaway.

Warning: Donot attempt to remove theglue stick from thegluegun.

Doingso can result in personal injury and/or damage theproduct.

Care and maintenance

• Always unplug theproduct from thewall socket before cleaning

• Clean theproduct using alightly moistenedcloth. Useonly mild

cleaning agents, never solvents or corrosive chemicals.

Responsible disposal

This symbol indicates that this product should not be disposed

of with general householdwaste. Thisapplies throughout

theentire EU. Inorder to prevent any harm to theenvironment

or health hazards caused by incorrect waste disposal,

theproduct must be handed in for recycling so that thematerial

can be disposed of in aresponsible manner. Whenrecycling

your product, take it to your local collection facility or contact

theplace of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specications

Power supply 220−240 V AC, 50 Hz

Power 25 (70) W

Mains lead 1.4 m

Protection class II

Warm-up time 3–5min

Glue sticks Ø 11mm

Weight 0.2 kg

Instructions for use

Preparations

• Keep thework area clean and welllit.

• Clean thecontact surfaces. Thesurfaces should be dry and clear of dust or

grease. Smooth surfaces should be roughed before gluing.

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Cocraft FL-159 Limpistol. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Cocraft. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Cocraft FL-159 Limpistol på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Cocraft Limpistoler
Flere håndbøker for Limpistoler

Ofte stilte spørsmål om Cocraft FL-159 Limpistol

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.