Bruksanvisning Clas Ohlson SY-M100W Solcellemodul

Bruksanvisning

English

GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail: [email protected] internet: www.clasohlson.co.uk

Ver. 20200914

Solar Panel

Art.no 36-8108 Model SY-M50W

36-8109 SY-M100W

Please read theentire instruction manual before using theproduct

and save it for future reference. We reserve theright for any errors in

text or images and any necessary changes made to technical data.

If you have any questions regarding technical problems please

contact Customer Services.

Product description

Thesolar panel has polycrystalline cells which generate electricity

when exposed to light.

Assembly

Note:

As soon as thesolar panel is exposed to light or sunlight,

the terminals in theconnection box will be live. To avoid short

circuits when assembling and connecting solar panels, turn them

away from thelight or cover them so that they are not producing

electricity during theactual connection procedure. Remove

thecovering when all theconnections have been made.

• Always mount thepanel on astraight, flat surface; do not bend

or twist thepanel.

• Never attempt to divide or disassemble thepanel.

• Avoid drilling or welding theframe whenever possible.

• Do not use any sharp metal tools or any other things that can

scratch thesurface of thepanel.

• Install thepanel horizontally or vertically with theconnection box

at thetop. Thesolar panel should be facing south and at anangle

of 30–40° (summer), 0–20° (winter). Bear in mind that if thesolar

panel is cast in shadow, its power output will drop considerably.

Choose alocation for thepanel with as little shade as possible.

Mount thepanel in such away that air can circulate freely around

it. Use stainless steel fasteners to attach thepanel. For easy

installations, use Clas Ohlson’s solar panel mount 36-4490.

Connection

50 W

Use suitable cable, preferably UV-resistant 1.5–4 mm², depending

on thelength of cable and size of panel. Open theconnection box

by unscrewing and removing thelid. Thread thecable through

thecable clamp. Carefully check thepolarity markings

on theterminal block and connect thepositive and negative

wires accordingly.

100 W

Use suitable cable, preferably UV-resistant 1.5–4 mm², depending

on thelength of cable and size of panel. Open theconnection box

by carefully releasing thetabs with ascrewdriver.

Thread thecable through thecable clamp. Carefully check thepolarity

marking on theterminals and connect thepositive and negative

wires. There are polarity markings next to thecable clamp screws.

1. Connection block 50 W

2. Negative terminal and

connection

3. Positive terminal and

connection

4. Connection block 100 W

5. Negative terminal and connection

6. Positive terminal and connection

Handy hint

Coat thewires and terminal posts with Vaseline to protect them

from corrosion. Make sure that thecable clamp is tightened.

Close thelid of theconnection box tightly to prevent moisture from

entering. If thesolar panel is to be mounted in acoastal area, it is

extra important to protect theinstallation from moisture to prevent

saltwater corrosion.

Thesolar panel should be connected to abattery system via

acharge regulator. See Clas Ohlson’s product range.

If more than one panel is used, they can be connected in either

series or parallel.

To connect 2 solar panels

in a12 V system: Connect

them in parallel by connecting

thepositive to thepositive and

thenegative to thenegative.

To connect 2 solar panels

in a24 V system: Connect

them in series by connecting

thepositive of one panel to

thenegative of thenext panel.

Responsible disposal

Connections for 12 V or 24 V systems

This symbol indicates that this product should not

be disposed of with general household waste. This

applies throughout theentire EU. In order to prevent

any harm to theenvironment or health hazards

caused by incorrect waste disposal, theproduct must

be handed in for recycling so that thematerial can be

disposed of in aresponsible manner. When recycling

your product, take it to your local collection facility

or contact theplace of purchase. They will ensure

that theproduct is disposed of in anenvironmentally

sound manner.

Specifications

Model SY-M50W SY-M100W

Cell type Polycrystalline Polycrystalline

Max. power 50 W 100 W

Max. voltage 18.5 V 18.5 V

Max. current 2.72 A 5.42 A

Idling voltage 23.2 V 23.2 V

Short-circuit current 2.87 A 5.74 A

Max. system voltage 600 V 600 V

Size (L × W × H) 510 × 610 × 30 mm 940 × 670 × 30 mm

Note: Thesolar panels have individual rating plates and their

specifications might differ slightly from theabove example.

-

+

-

+

-

+

4.Connection block 100 W

5.Negative terminal and connection

6.Positive terminal and connection

4

6

5

-

+

-

+

2

1

3

Vurdering

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Clas Ohlson SY-M100W Solcellemodul. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Clas Ohlson. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Clas Ohlson SY-M100W Solcellemodul på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Alle bruksanvisninger for Clas Ohlson Solcellemoduler
Flere håndbøker for Solcellemoduler

Relaterte produkter

Bruksanvisning

Clas Ohlson SY-M50W Solcellemodul

Bruksanvisning

Dometic MT SM 120 TL Solcellemodul

Bruksanvisning

Biltema 31-631 Solcellemodul

Bruksanvisning

Dometic MT SM 65 TL Solcellemodul

Bruksanvisning

Biltema 31-630 Solcellemodul

Relaterte kategorier