Bruksanvisning Black and Decker GT6025 Hekksaks

Trenger du en bruksanvisning for Black and Decker GT6025 Hekksaks? Nedenfor kan du se og laste ned PDF-bruksanvisningen gratis på norsk. Dette produktet har for øyeblikket 4 vanlige spørsmål, 0 kommentarer og har 0 stemmer. Hvis dette ikke er bruksanvisningen du ønsker, vennligst kontakt oss.

Er ditt produkt defekt og finner du ikke løsningen i bruksanvisningen? Dra til en Repair Café for gratis hjelp til reparasjon.

Bruksanvisning

Loading…

4
ENGLISH
English
Intended use
Your Black & Decker hedge trimmer has been designed
for trimming hedges, shrubs and brambles. This tool
is intended for consumer use only.
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow all instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk
of electric shock.
f. If operating a power tool in a damp location
is unavoidable, use a Residual Current Device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f. Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
!
Last ned bruksanvisning på norsk (PDF, 2.96 MB)
(Tenk på miljøet og bare skriv ut denne bruksanvisningen hvis det virkelig er nødvendig)

Loading…

Vurdering

La oss få vite hva du syns om Black and Decker GT6025 Hekksaks ved å gi en produktbedømmelse. Vil du dele dine erfaringer med dette produktet eller stille et spørsmål? Legg igjen en kommentar nederst på siden.
Er du fornøyd med Black and Decker GT6025 Hekksaks?
Ja Nei
Vær den første til å bedømme dette produktet
0 stemmer

Bli med i samtalen om dette produktet

Her kan du dele hva du synes om Black and Decker GT6025 Hekksaks. Hvis du har et spørsmål, les først bruksanvisningen nøye. Be om en bruksanvisning kan gjøres ved å bruke vårt kontaktskjema.

Mer om denne håndboken

Vi forstår at det er fint å ha en papirhåndbok for Black and Decker GT6025 Hekksaks. Du kan alltid laste ned bruksanvisningen fra nettsiden vår og skrive den ut selv. Hvis du vil ha en original bruksanvisning, anbefaler vi at du kontakter Black and Decker. De kan kanskje gi en original bruksanvisning. Leter du etter bruksanvisningen til Black and Decker GT6025 Hekksaks på et annet språk? Velg ditt foretrukne språk på hjemmesiden vår og søk etter modellnummeret for å se om vi har det tilgjengelig.

Spesifikasjoner

Merke Black and Decker
Modell GT6025
Kategori Hekksakser
Filtype PDF
Filstørrelse 2.96 MB

Alle bruksanvisninger for Black and Decker Hekksakser
Flere håndbøker for Hekksakser

Ofte stilte spørsmål om Black and Decker GT6025 Hekksaks

Vårt supportteam søker etter nyttig produktinformasjon samt svar på ofte stilte spørsmål. Hvis du finner en feil i våre ofte stilte spørsmål, vennligst gi oss beskjed ved å benytte vårt kontaktskjema.

Hvordan vet jeg at hekkekutteren min er sløv? Verifisert

Når grener blir trukket i stedet for å kutte, er hekksakseren sløv og må skjerpes.

Det var nyttig (345) Les mer

Hvordan sliper jeg hekksaksbladene mine? Verifisert

Å slipe hekksaksen er viktig for å opprettholde ytelsen og effektiviteten til verktøyet. For å slipe knivene trenger du en fil eller en slipestein som er spesielt utviklet for den type kniv du har på hekksaksen din.

Det var nyttig (299) Les mer

Hvordan smører jeg hekksaksbladene mine? Verifisert

Smøring av hekksaksbladene vil bidra til å redusere friksjon og slitasje, og forlenge verktøyets levetid. Bruk en høykvalitets smøreolje spesielt utviklet for hekkklippere og påfør en liten mengde på knivene etter hver bruk.

Det var nyttig (146) Les mer

Hvordan kan jeg forhindre at det dannes rust på hekksaksbladene mine? Verifisert

Rust kan forårsake skade på hekksaksbladene dine, og redusere ytelsen og levetiden. For å forhindre rust, rengjør og tørk knivene grundig etter hver bruk og oppbevar dem på et tørt, rent sted. Du kan også vurdere å påføre et beskyttende belegg, som olje eller en rusthemmer, på bladene før du lagrer dem.

Det var nyttig (89) Les mer
Bruksanvisning Black and Decker GT6025 Hekksaks

Relaterte produkter

Relaterte kategorier

×
Download